Anti-fingerprint coating Innovative nanocoating to reduce the visibility of fingerprints: The coating is distinguished by its ability to maintain surface characteristics – such as gloss and roughness – and is especially suitable for matte surfaces made of metal or plastic.
AFP (Anti Finger Print) has become one of our most inquired and demanded coatings on various Stainless Steel finishes because it enhances the surface hardness . This technique was originally utilized in the aeronautics industry. Through the manufacturing treatment, the Nano compound becomes attached to the metallic surface, resulting in the forming of a thin but durable protective coating. This coating creates a barrier to prevent the intrusion of oxygen and moisture enhancing the materials anticorrosion and anti fingerprint abilities. With the application of Nano anti fingerprint coating (AFP), the surface hardness of stainless steel is increased.
No 4 finish stainless steel is the workhorse of the light fabrication industry. The easiest of the finishes to maintain, No 4 finish is used for work surfaces, handrails and where appearance is important. A ‘No 4’ surface is produced by cutting the surface with abrasive belts to remove a very small amount of metal without affecting its thickness. This is a ground unidirectional finish obtained with 150 grit abrasive. It is not highly reflective, but is a good general purpose finish on components which will suffer from fairly rough handling in service.
Grade : SUS304, SUS316L, SUS321, SUS430 etc.
Surface treatment on HL, No.4, Vibration, Ti-HL, Bead blast and various embossed finishes covered with protective film
Thickness range: 0.3 - 3.0 mm
Width: 1000mm, 1219mm, 1500mm
Length as per your request
Application: elevator doors, kitchen ware, refrigerator panels
We apply a nanometer to the stainless that chemically bonds and is transparent provides lasting protection for stainless steel. The Nano compound becomes attached to the metallic surface, resulting in the forming of a thin but durable protective coating. This coating creates a barrier to prevent the intrusion of oxygen and moisture enhancing the materials anti-corrosion and anti-fingerprint abilities. With the application of Nano anti-fingerprint coating (AFP), the surface hardness of stainless steel is increased. This excellent coating protects Stainless Steel from water, oil, dust, and fingerprints, and makes the stainless steel easy to clean.