• Language
  • Phone IconCall Us:+91 22 66109393
  • Email Id : sales@ngi.net.in

Incoloy DS Coils

We produce ALLOY DS Plates,ALLOY DS Sheets,ALLOY DS Coils, ALLOY DS Strips,INCOLOY ALLOY DS Plates,INCOLOY ALLOY DS Sheets,INCOLOY ALLOY DS Coils, INCOLOY ALLOY DS Strips,ALLOY DS cold rolled strips,ALLOY DS hot rolled strips,ALLOY DS hot rolled plates, ALLOY DS cold rolled plates from china We could produce ALLOY DS plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide. The thickness of ALLOY DS strips and coil that we could do range from 0.05MM to 3MM The surface finish of ALLOY DS strips and coils that we could do is as follows:2B / 2D / BA The hardness of INCOLOY ALLOY DS strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

In order to control the quality of ALLOY DS plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

Chemical Properties :

Grade Ni Cr Cu C Mn P S Si

Incoloy Alloy DS

%
34.5-41.0

%
17.0-19.0

%
≤0.50

%
≤0.10

≤ %
0.80-1.50

≤ %
0.03

≤ %
0.03

≤ %
1.90-2.50

Mechanical Properties :

Density g/cm³ Resistant on air up to °C Tensile strength Rm N/mm² 0.2% Yield strength Rp
≥ N/mm²
Elongation A5
≥ %
8 1100 550-750 230 30 %
Our Products